Facebook Twitter Instagram
Facebook Twitter Instagram
718 426 7200

Glendale Register

Search

Glendale Register

Glendale

Register

Ultimate Linings Best Industrial Coatings,Protective Coatings,Automotive Coatings,Residential Coatings,Home Insulation

webadmin on January 4, 2013

Ultimate Linings is an industry leader in providing long lasting coatings solutions with superior quality, application technology, and technical support. We are committed to supplying advanced products that solve our customers’ problems in an ever changing and challenging market place. Whether it is an industrial, OEM, or a retail bed liner application…Ultimate Linings has the right material and support.

Ultimate Linings Best| Industrial Coatings| Protective Coatings|Automotive Coatings
Ultimate Linings industrial product formulations offer solutions for abrasion resistance, water proof coatings, blast resistance,hazardous materials containment energy, ballistic armor, chemical resistance, floor coatings, energy efficient insulation, structural reinforcement,Protective Coatings, corrosion resistance, fire retardant and thermal barrier coatings.
Ultimate Linings Best| Industrial Coatings| Protective Coatings|Automotive CoatingsUltimate Linings elastomer technology polyurea coatings have been specifically formulated for the advanced Protective and Specialty Coatings Contractor. Our product line is designed around the professional applicator that has field installation experience and all the required surface preparation and application equipment. Unlike other liner manufacturers that started with one product Ultimate Linings has a full array of coating systems engineered for use under the most extreme conditions. With years of chemical and application experience, we understand that no single product can do it all.

Ultimate coatings are easy to apply and are durable environmental barriers under the toughest of conditions and provide resistance to inorganic bases, acids, alkaline materials and hydrocarbon solvents.Our vehicular and pedestrian decks, industrial flooring and wall systems are specifically formulated to withstand heavy traffic in the most critical areas. These seamless, elastomeric and water resistant systems can prevent the deterioration of concrete and rusting of the reinforcing steel rebars. They have an extended open time to broadcast granules for an anti-slip surface and are flexible and responsive to expansion and contraction. Polyurea is resistant to many fuels and chemicals. It is commonly used in fuel pits and pipeline secondary containment. Polyurea is not resistant to all chemicals and necessary compatibility tests and surface preparation are always required.

AUTOMOTIVE COATINGS

Ultimate Linings was founded on serving the Automotive coatings Industry’s need for high quality bed liner material. Working through local spray shops, Ultimate Linings has grown year over year to be one of the largest industry provides across the United States and beyond. Today, Ultimate Linings offers a wide range of bed liner chemical options as well as varied application methods.No matter the size of the operation, we have a solution to fit your business. Ultimate Linings Best Automotive Coating Ultimate Linings sprayed-on elastomeric polyurethane, polyurea and hybrid solutions are 100% solids, VOC free and designed for reducing maintenance costs and maximize return on investment. Our coatings can be sprayed onto virtually any type of equipment and substrate material, regardless of penetrations or shape, whether new or already in-service. Our history and reputation prove that we can we take linings to the extreme limits of endurance with applications in the most rigorous environments such as: wheeled vehicles, commercial/ specialty vehicles, fire/EMS/ambulance, heavy equipment, vans/Trailers and mass transit. Our application friendly products have a very high tolerance for extreme atmospheric conditions. The highly advanced high pressure formula has the highest amount of reactive polyurea to eliminate foaming during high humidity and high temperature weather. With several chemical formulas available, we have the right solution for your needs.

Spray Elastomer Touts High Abrasion Resistance

webadmin on January 4, 2013

Ultimate Linings has rolled out a high-abrasion resistant spray elastomer designed for demanding applications against abrasion and corrosion.

Ultimate Linings Product UL TK 22 (High Abrasion Resistance) is a fast-set, 100% solids, flexible, two-component spray elastomer made to deliver high performance against abrasion tear and impact, the company says.

The product is intended for use as a protective lining and . Coating on the interior of concrete, masonry and metal structures in dredging and petroleum refineries, cargo containers, mining operations, landfill containment, marine environments, secondary containment water and wastewater treatment, and industrial and manufacturing facilities.

Application and Features

UL TK 22 (HAR) may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature, allowing application in most temperatures, the manufacturer says. Fast gel time makes the product suitable for applications to -20F degrees.

According to the company, the product offers:

• Abrasion resistance

• Hydrolytic stability

• High tear and impact resistance

• Impact dampening

• Thermal stability

• Zero VOC (100% solids) formulation

• Low temperature flexibility

• Two standard colors (clear and neutral), with custom colors available on request

• Chemical resistance

• Coating of carbon or

mild steel metals without primer

Surface Preparation

Most failures in the performance of surface Coatings can be attributed to poor surface preparation. Polyurea Coatings rely on the structural strength of the substrate to which they are applied. All surfaces must be free of dust, dirt, oil, grease, rust, corrosion and other contaminants. When coating substrates previously used, it is important to consider the possibility of substrate absorption, which may affect the adhesion of the Coatings system, regardless of the surface preparation. Ultimate Linings recognizes the potential for unique substrates from one project to another.

For steel substrates, remove all oil, grease and weld spatters, and round off any sharp edges from the surface. Aluminum substrates should be blasted with aluminum oxide or sand, not with steel or metal grit. Excessive blasting may result in a warped or deformed surface. After blasting, wash aluminum with a commercially available aluminum cleaner. Allow to dry, then prime. Brass and copper should be blasted with sand, not with steel or metal grit. Remove all dust and grease before applying primer. Galvanized surfaces should be cleaned and degreased before priming. They should not be blasted with an abrasive grit. An adhesion test is recommended before starting the project.

Stainless steel may be grit blasted and degreased before priming. Some stainless-steel alloys are so inert that satisfactory bonding is not possible. An adhesion test is recommended before starting the project. Cast iron, whether old or new, should be blasted with steel grit and degreased before priming. Old cast iron is difficult to prepare for a satisfactory bond.

The substrate can absorb oil- and water-soluble contaminants that will keep returning to the surface after the Coatings system has been applied and affect the system’s adhesion. An adhesion test is recommended before starting the project.

Houston-based Ultimate Linings has been a provider of bed liners and polyurethane, polyurea and hybrid industrial Roof Coatings solutions for nearly 20 years.

Spray Elastomer Touts High Abrasion Resistance

webadmin on January 4, 2013

Ultimate Linings has rolled out a high-abrasion resistant spray elastomer designed for demanding applications against abrasion and corrosion.

Ultimate Linings Product UL TK 22 (High Abrasion Resistance) is a fast-set, 100% solids, flexible, two-component spray elastomer made to deliver high performance against abrasion tear and impact, the company says.

The product is intended for use as a protective lining and . Coating on the interior of concrete, masonry and metal structures in dredging and petroleum refineries, cargo containers, mining operations, landfill containment, marine environments, secondary containment water and wastewater treatment, and industrial and manufacturing facilities.

Application and Features

UL TK 22 (HAR) may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature, allowing application in most temperatures, the manufacturer says. Fast gel time makes the product suitable for applications to -20F degrees.

According to the company, the product offers:

• Abrasion resistance

• Hydrolytic stability

• High tear and impact resistance

• Impact dampening

• Thermal stability

• Zero VOC (100% solids) formulation

• Low temperature flexibility

• Two standard colors (clear and neutral), with custom colors available on request

• Chemical resistance

• Coating of carbon or

mild steel metals without primer

Surface Preparation

Most failures in the performance of surface Coatings can be attributed to poor surface preparation. Polyurea Coatings rely on the structural strength of the substrate to which they are applied. All surfaces must be free of dust, dirt, oil, grease, rust, corrosion and other contaminants. When coating substrates previously used, it is important to consider the possibility of substrate absorption, which may affect the adhesion of the Coatings system, regardless of the surface preparation. Ultimate Linings recognizes the potential for unique substrates from one project to another.

For steel substrates, remove all oil, grease and weld spatters, and round off any sharp edges from the surface. Aluminum substrates should be blasted with aluminum oxide or sand, not with steel or metal grit. Excessive blasting may result in a warped or deformed surface. After blasting, wash aluminum with a commercially available aluminum cleaner. Allow to dry, then prime. Brass and copper should be blasted with sand, not with steel or metal grit. Remove all dust and grease before applying primer. Galvanized surfaces should be cleaned and degreased before priming. They should not be blasted with an abrasive grit. An adhesion test is recommended before starting the project.

Stainless steel may be grit blasted and degreased before priming. Some stainless-steel alloys are so inert that satisfactory bonding is not possible. An adhesion test is recommended before starting the project. Cast iron, whether old or new, should be blasted with steel grit and degreased before priming. Old cast iron is difficult to prepare for a satisfactory bond.

The substrate can absorb oil- and water-soluble contaminants that will keep returning to the surface after the Coatings system has been applied and affect the system’s adhesion. An adhesion test is recommended before starting the project.

Houston-based Ultimate Linings has been a provider of bed liners and polyurethane, polyurea and hybrid industrial Roof Coatings solutions for nearly 20 years.

COMMERCIAL RETAILS STORES GETTING HOT TO RENT AGAIN, IN MIDDLE VILLAGE,NEW YORK 11379

webadmin on October 21, 2012

news update, October 21, 2012. “COMMERCIAL RETAIL MARKET HEATING UP”. With 33 years of Real Estate Experience, I am happy to see the activity increase tremendously. I usually attain the most listings on Metropolitan Avenue and have the highest Rental Rate in the Community. For Tenants who are new at finding stores, or from other areas, you must know that the Landlords do not pay the Real Estate Commission for renting the Store. However due to the previous decline in the Market, I only charge 1 months rent flat commission. This has provided a better opportunity to all tenants looking to open up a new business in Middle Village. Current Hot Retail Spaces available are:
1) 70-12 80 St. right off Cooper Avenue. The square footage is 1385 base. with Central air, and two car front parking. And the rent is only $2,400.
2) 900 sq.ft. base. on Metro, rent $2,800.
3) 735 sq.ft. base. on Metro, rent is $2,700.
//////////
MOST AFFORDABLE ‘PROFESSIONAL OFFICE SPACES’ WITH BELOW RENT IS RIGHT ON METROPOLITAN AVENUE, RIGHT NOW. ABOVE CAPITAL ONE BANK-6 ROOMS, FULL BATHROOM, KIT.AREA, PLENTY OF PRIVACY, MOVE-IN CONDITION AT $2,000 MONTHLY RENT!
**********
SPECIAL THANK YOU TO GLENDALE REGISTER FOR KEEPING THE PUBLIC
INFORMED BY A PROFESSIONAL IN THE REAL ESTATE BUSINESS WITH DECADES OF EXPERIENCE.
JIM TURANO/BROKER DIVERSE REAL ESTATE
1-347-837-9206
#1 MOST GOOGLED REAL ESTATE BROKER IN THE COMMUNITY!

COMMERCIAL RETAILS STORES GETTING HOT TO RENT AGAIN, IN MIDDLE VILLAGE,NEW YORK 11379

webadmin on October 21, 2012

news update, October 21, 2012. “COMMERCIAL RETAIL MARKET HEATING UP”. With 33 years of Real Estate Experience, I am happy to see the activity increase tremendously. I usually attain the most listings on Metropolitan Avenue and have the highest Rental Rate in the Community. For Tenants who are new at finding stores, or from other areas, you must know that the Landlords do not pay the Real Estate Commission for renting the Store. However due to the previous decline in the Market, I only charge 1 months rent flat commission. This has provided a better opportunity to all tenants looking to open up a new business in Middle Village. Current Hot Retail Spaces available are:
1) 70-12 80 St. right off Cooper Avenue. The square footage is 1385 base. with Central air, and two car front parking. And the rent is only $2,400.
2) 900 sq.ft. base. on Metro, rent $2,800.
3) 735 sq.ft. base. on Metro, rent is $2,700.
//////////
MOST AFFORDABLE ‘PROFESSIONAL OFFICE SPACES’ WITH BELOW RENT IS RIGHT ON METROPOLITAN AVENUE, RIGHT NOW. ABOVE CAPITAL ONE BANK-6 ROOMS, FULL BATHROOM, KIT.AREA, PLENTY OF PRIVACY, MOVE-IN CONDITION AT $2,000 MONTHLY RENT!
**********
SPECIAL THANK YOU TO GLENDALE REGISTER FOR KEEPING THE PUBLIC
INFORMED BY A PROFESSIONAL IN THE REAL ESTATE BUSINESS WITH DECADES OF EXPERIENCE.
JIM TURANO/BROKER DIVERSE REAL ESTATE
1-347-837-9206
#1 MOST GOOGLED REAL ESTATE BROKER IN THE COMMUNITY!

OKTOBERFEST CELEBRATION AT THE SHOPS AT ATLAS PARK

webadmin on October 4, 2012

GLENDALE, NY — Manor Oktoberfest, with locations in Glendale and Forest Hills, New York proudly announces its Oktoberfest Celebration in conjunction with The Shops at Atlas Park.

“We are looking forward to reviving our outdoor event,” remarks Mark Gallagher, owner of Manor Oktoberfest. “It will bring renewed interest to The Shops at Atlas Park while allowing us to hold a celebration that builds upon and revolves around the Glendale community and its surrounding neighborhoods.”

Just like the famed Oktoberfest held every year in Münich, Germany, there will be dancing, live music, Bavarian food such as Bratwurst and huge Oktoberfest Pretzels imported from Münich as well as imported beers from Germany. Highlights also include a live performance from the popular German American band, die Schlauberger (dSb) and a stein-hoisting competition with top prizes for both male and female participants.

The 2-day event will take place on Saturday, October 13 from 3pm-10pm and Sunday, October 14 from 12noon-5pm. The Shops at Atlas Park are located at 8000 Cooper Avenue, Glendale, NY 11385.

In its relaxed and comfortable atmosphere, Manor Oktoberfest offers up authentic German and American fare along with a wide variety of the finest beers on tap and in bottle. Manor Oktoberfest builds on the tradition of the Woodhaven staple, Manor Delicatessen, which is renowned for its high quality delicacies that bring a slice of Bavaria to Queens. Deli owner Gallagher brings forth the same high caliber offerings and service to his Manor Oktoberfest restaurants. Immerse yourself in the Bavarian atmosphere while relaxing with a beer and a bratwurst, or try the delicious sauerbraten, either way you won’t be sorry.

Manor Oktoberfest
The Shops At Atlas Park
80-28 Cooper Avenue – Just outside the movie theater
Glendale, NY 11385
718 326 2201

Manor Oktoberfest Forest Hills
73-11 Yellowstone Blvd.
Forest Hills, NY 11375
718 544 2400

www.manoroktoberfest.com

To speak directly with Manor Oktoberfest owner Mark Gallagher:
917 582 9665

Facebook event page:
https://www.facebook.com/events/426249084104101/?fref=ts

For more information on die Schlauberger:

Home

For more information on The Shops at Atlas Park:
http://www.shopatlaspark.com

OKTOBERFEST CELEBRATION AT THE SHOPS AT ATLAS PARK

webadmin on October 4, 2012

GLENDALE, NY — Manor Oktoberfest, with locations in Glendale and Forest Hills, New York proudly announces its Oktoberfest Celebration in conjunction with The Shops at Atlas Park.

“We are looking forward to reviving our outdoor event,” remarks Mark Gallagher, owner of Manor Oktoberfest. “It will bring renewed interest to The Shops at Atlas Park while allowing us to hold a celebration that builds upon and revolves around the Glendale community and its surrounding neighborhoods.”

Just like the famed Oktoberfest held every year in Münich, Germany, there will be dancing, live music, Bavarian food such as Bratwurst and huge Oktoberfest Pretzels imported from Münich as well as imported beers from Germany. Highlights also include a live performance from the popular German American band, die Schlauberger (dSb) and a stein-hoisting competition with top prizes for both male and female participants.

The 2-day event will take place on Saturday, October 13 from 3pm-10pm and Sunday, October 14 from 12noon-5pm. The Shops at Atlas Park are located at 8000 Cooper Avenue, Glendale, NY 11385.

In its relaxed and comfortable atmosphere, Manor Oktoberfest offers up authentic German and American fare along with a wide variety of the finest beers on tap and in bottle. Manor Oktoberfest builds on the tradition of the Woodhaven staple, Manor Delicatessen, which is renowned for its high quality delicacies that bring a slice of Bavaria to Queens. Deli owner Gallagher brings forth the same high caliber offerings and service to his Manor Oktoberfest restaurants. Immerse yourself in the Bavarian atmosphere while relaxing with a beer and a bratwurst, or try the delicious sauerbraten, either way you won’t be sorry.

Manor Oktoberfest
The Shops At Atlas Park
80-28 Cooper Avenue – Just outside the movie theater
Glendale, NY 11385
718 326 2201

Manor Oktoberfest Forest Hills
73-11 Yellowstone Blvd.
Forest Hills, NY 11375
718 544 2400

www.manoroktoberfest.com

To speak directly with Manor Oktoberfest owner Mark Gallagher:
917 582 9665

Facebook event page:
https://www.facebook.com/events/426249084104101/?fref=ts

For more information on die Schlauberger:

Home

For more information on The Shops at Atlas Park:
http://www.shopatlaspark.com

Christ the King High School Media Advisory

webadmin on September 20, 2012

Bishop Paul Sanchez will visit Christ the King High School and preside over CK’s Annual Opening of School Mass, where we will ask God’s blessings for the new school year as well as express our gratitude for the past 50 years as a Catholic High School committed to providing a quality of education where students can obtain a high level of achievement based upon their unique abilities and their relationship with God.

The Mass will take place at 9:00 am on Tuesday, September 25, 2012 at Christ the King’s Kirwin Center for the Performing Arts, located at 68-02 Metropolitan Avenue, Middle Village, NY

For more information, please call Margaret Tapalaga in CK Public Relations at 718-366-7400 EXT 235.

Christ the King High School Media Advisory

webadmin on September 20, 2012

Bishop Paul Sanchez will visit Christ the King High School and preside over CK’s Annual Opening of School Mass, where we will ask God’s blessings for the new school year as well as express our gratitude for the past 50 years as a Catholic High School committed to providing a quality of education where students can obtain a high level of achievement based upon their unique abilities and their relationship with God.

The Mass will take place at 9:00 am on Tuesday, September 25, 2012 at Christ the King’s Kirwin Center for the Performing Arts, located at 68-02 Metropolitan Avenue, Middle Village, NY

For more information, please call Margaret Tapalaga in CK Public Relations at 718-366-7400 EXT 235.

Christ the King Royals Basketball Camp Kick Off Season with Rally for Alumni Olympians Christ the King Royals Basketball Camp Kick Off Season with Rally for Alumni Olympians Christ the King Royals Basketball Camp Kick Off Season with Rally for Alumni Olympians

webadmin on July 30, 2012

Christ the King Royals Basketball Camp opened their 2012 Summer Camp season by giving a big shout across the pond, wishing the 2012 Olympics USA Women’s Basketball team the best of luck. Christ the King Regional High School is proud to have two alumni, Sue Bird (’98) and Tina Charles (’06) playing in the 2012 Olympics, taking place in London.

Both Sue Bird and Tina Charles are not only alumni of Christ the King Regional High School, but have attended and coached at Christ the King Royals Basketball Camp as well. Past NBA players, such as Craig “Speedy” Claxton and Erik Barkley have also come back as coaches to the camp.

Christ the King Royals Basketball Camp features week long workshops where children ages 7 to 16 learn the skills of basketball as well as the importance of sportsmanship. To date, both the Camp and CK High School have produced a record 4 Basketball Olympians including Lamar Odom (2004 Summer Olympics) and Chamique Holdsclaw (2000 Summer Olympics).

Pictured with the Basketball Camp are also attendees of Christ the King’s Daycare, who celebrated a week long Olympic theme, which included their own Olympics-inspired sports.

CK Basketball Camp runs in three separate weekly programs, providing separate girl and boy weeks through August 17th. For more information and registering for Girls Week (August 6-10) and Boys Week #2 (August 13-17), as well as Christ the King Daycare, visit our website at www.ctkny.org

About Christ the King Regional High School
Christ the King Regional High School is a private, co-educational Catholic High School with a 4-year college preparatory curriculum. Located in Middle Village, Queens, Christ the King Regional High School draws students from all areas. The school is accredited by The Board of Regents of the State of New York and the Middle States Association of Colleges and Secondary Schools. Christ the King’s current enrollment is approximately 1000 students. The faculty numbers 45.

More information is available http://www.ctkny.org/. Find Christ the King on Facebook at facebook.com/CTKNY.

© 2021 – All Rights Reserved – Glendale Register
Facebook Twitter Instagram
  • Privacy Policy
  • Faqs

Fill the Form for Events, Advertisement or Business Listing